10/15–10/31 2017. More surfacer (Evercoat Superbuild 4:1 or Finish Sand 4:1). I had a lot of trouble getting the bumps out of the main design line through the car. An experienced painter told me of a technique that he uses, and it worked very well. First lay out a tape line on the car that is about 1/8-inch above the edge that is to be defined, then overlap with another tape that is on the line you want. Use spray adhesive to stick sandpaper on a stiff straight piece of something about 3/4-inches wide and about 6-inches long. Then working off the surface above the tape diagonally sand onto the tape. What happens is that the first tape sands away, but the two thicknesses of tape will hold the edge.